The Quality Of Blooming Steamed Sponge Cake With Different Steamer Materials And Steaming Times
(1) Universitas Negeri Padang
(2) Universitas Negeri Padang
(3) Universitas Negeri Padang
(4)
(*) Corresponding Author
Abstract
Steamed sponge cake is a popular cake product due to its fluffy texture, soft crumb, and distinctive sweet taste. One of the important factors that determine the success of steamed sponge cake is the material of the steaming equipment and the steaming time. This study aims to determine the effect of steaming equipment materials (bamboo, aluminum, and stainless steel) and steaming time (15, 20, and 25 minutes) on the quality of steamed sponge cake. The study used an experimental method with a 3×3 factorial design and three replicates. Organoleptic tests were conducted by five trained panelists on aspects of volume, four-segment fluffy shape, and texture (moist, soft, and finely porous). The results of the analysis showed that the steaming tool material had a significant effect on all quality aspects (p < 0.05), while the steaming time and the interaction between the two had no significant effect (p > 0.05). The highest average quality scores were obtained for the aluminum steamer, namely volume 3.33, four-segment shape 3.00, and neat shape 3.07. The Fcount value for the steamer factor was 6.41 for volume, 61.00 for four-segment fluffy shape, and 21.80 for neat shape, which was greater than the Ftable (3.31) at the 5% level. Thus, it can be concluded that the steamer material has a significant effect on the quality of steamed sponge cake, where aluminum steamers produce products with expanded volume, perfect four-segment fluffy shape, and soft and moist texture that are most preferred by panelists.
Keywords
References
Aghisyana Rahmatika, W.S. (2022) ‘Jurnal Pendidikan Tata Boga dan PENGARUH SUBSTITUSI TEPUNG MOCAF ( Effect Of Mocaf Flour Substitution On Kastengel Cookies Quality )’, Jurnal Pendidikan Tata Boga, 3(3), pp. 427–431. Available at: https://doi.org/10.24036/jptbt.v3i1.319.
Agustina, N. and Fitriani, S. (2021) ‘Pemanfaatan Kacang Merah dan Ubi Jalar Putih sebagai Bahan Bolu Kukus’, Jurnal Ilmiah Teknologi Pertanian Agrotechno, 6(2), p. 62. Available at: https://doi.org/10.24843/jitpa.2021.v06.i02.p03.
Aji, D. and Hidayat, J. (2023) ‘Pelatihan pembuatan Bolu Kukus di dusun Komplang Pandean’, Al-Maun, pp. 45–49.
Cristiana, D. and Yunaningsih, A. (2020) ‘Edukasi Alat Dapur Tradisional Untuk Pelestarian Warisan Budaya’, Altasia Jurnal Pariwisata Indonesia, 2(3), p. 311. Available at: https://doi.org/10.37253/altasia.v2i3.843.
Denta Mandra Pradibta, Nukke Sylvia, I.A.T. (2019) ‘Denta Mandra Pradipta B Program Studi Desain Komunikasi Visual, Fakultas Desain dan Seni Kreatif Universitas Mercu Buana Ilsa Anola Tiyama’, Jurnal Desain & Seni, 6(1), pp. 145–172.
Jamilah, L. et al. (2022) ‘Material Bambu Sebagai Produk Alat Makan Universitas Trilogi’, IKRA-ITH Teknologi Jurnal Sains dan …, 6(1), pp. 28–34. Available at: http://journals.upi-yai.ac.id/index.php/ikraith-teknologi/article/download/1669/1374.
Jimenez, P.S. et al. (2024) ‘Understanding retort processing: A review’, Food Science and Nutrition, 12(3), pp. 1545–1563. Available at: https://doi.org/10.1002/fsn3.3912.
Maharani, A. and Elida, E. (2024) ‘Quality Of Bakpao With The Use Of Different Steaming Equipment’, Jurnal Pendidikan Tata Boga dan Teknologi, 5(2), p. 291. Available at: https://doi.org/10.24036/jptbt.v5i2.15339.
Meiadisti, D. (2023) ‘LAPORAN TUGAS AKHIR oleh Debora Selfiyanti Meiadisti PROGRAM STUDI MANAJEMEN AGRIBISNIS’.
Prasetyo, A.F., -, F. and Isaura, E.R. (2022) ‘Perbedaan Kadar Zat Besi Berdasarkan Waktu Pemasakan Dan Metode Yang Diterapkan Pada Tempe Dan Hati Sapi: Sebuah Studi Eksperimental’, Media Gizi Indonesia, 17(2), pp. 159–167.
Pratiwi, Rinjani Alam, N. (2020) ‘Ubi Jalar’, Jurnal Triton, 11(2), pp. 42–50.
Rambe, S.A. and Gusnita, W. (2022) ‘Pengaruh Substitusi Tepung Ubi Jalar Ungu Terhadap Kualitas Bolu Kukus Mekar ( The Effect Of Purple Sweet Potato Flour Substitution On The Quality Of Blooming Steamed Sponge )’, Jurnal Pendidikan Tata Boga, 3(1), pp. 68–74. Available at: https://doi.org/10.2403/80sr290.00.
Ririn Yuliani, Siti Tamaroh Cahyano Murti, I.A.F. (2024) ‘PENGARUH PENAMBAHAN UWI UNGU (Dioscorea alata L) DAN TEPUNG KACANG HIJAU (Vigna radiata L) TERHADAP SIFAT FISIK, KIMIA DAN TINGKAT KESUKAAN BOLU KUKUS’, 25(1), pp. 89–97.
S, T.A. et al. (2021) ‘Effect of breadfruit flour substitution (Artocarpus altilis) on the organoleptic properties of steamed sponge.’, Tata Boga Journal, 10(2), pp. 314–323. Available at: https://ejournal.unesa.ac.id/index.php/jurnal-tata-boga/.
Setiawan, F. (2022) ‘The Effect of Time Variations in the Hot Dipping Alumunizing Coating Stainless Steel 304 Process on Material Characteristics and Thermal Conductivity’, Journal of Mechanical Engineering Manufactures Materials and Energy, 6(1), pp. 32–47. Available at: https://doi.org/10.31289/jmemme.v6i1.6452.
Stefania, E., Ludong, M.M. and Oessoe, Y.Y.E. (2021) ‘PEMANFAATAN LABU KUNING (Cucurbita moschata Duch.) DALAM PEMBUATAN BOLU KUKUS MEKAR’, Jurnal Teknologi Pertanian (Agricultural Technology Journal, 12(1), p. 44. Available at: https://doi.org/10.35791/jteta.v12i1.38926.
Toys, E.O. (2019) ‘Pengaruh Substitusi Tepung Beras Merah (Oryza nivaro L) Terhadap Sifat Organoleptik Bolu Kukus’, 8(5), p. 55.
Yanti, S. (2019) ‘PENGARUH PENAMBAHAN TEPUNG KACANG HIJAU TERHADAP KARAKTERISTIK BOLU KUKUS BERBAHAN DASAR TEPUNG UBI KAYU (Manihot esculenta)’, Jurnal TAMBORA, 3(3), pp. 1–10. Available at: https://doi.org/10.36761/jt.v3i3.388.
DOI: 10.24036/jptbt.v6i3.27009
Article Metrics
Abstract View : 6 times; PDF : 7 times
Refbacks
- There are currently no refbacks.
Copyright (c) 2025 Mifta Zhafira Khairani
This work is licensed under a Creative Commons Attribution 4.0 International License.
2.jpg)
